Flat Shaped Non Reflective Glass 2mm 3mm Thickness For Electronic Display

2mm 3mm Anti Reflective Glass AR Glass Single Side Coated Anti Reflection Glass

Product Description:

AR Glass is coating on the outer surfaces with a thin coating that helps light pass through the glass and not get reflected away fron it .Regular uncoated glass transmits about 91% of the light through it , with about 8% of the light reflecting back (the rest is absorbed).Coating the outer surfaces of the glass can reduces the amount of light reflected from 8% to 1 or 2%.This is a noticeale improvement in two ways.First,there is less glare or reflection off the glass ,allowing you to look through the glass easier. Second ,light actually goes through the glass,making eveything look brighter.Anti-reflective glass can be dip-coated on one side or both sides .Thin layers are applied to the glass , using the sol-gel coating technique and the mainly metal oxydic layers are hard,extremely scratch-resistant and offer high chemical resistance.The coating reduces residual reflections to approximately 1% yet ,at the same time,increase the light transmittance to as high as 98%.

Anti-Reflective glass(AR) is also called add-transmissivity glass.

Adopting advanced magnetron sputtering vacuum coating technology, to coat the Nano optics multilayer film on the glass surface, it can enhance the transmissivity of glass from 89% to >=96%, and decrease reflectivity from 8% to <=2%.

If four layers AR film coated on double surfaces, the transmissivity can be >=98%, the reflectivity can be <=1%, no reflect and anti giddy light, it makes image more clear against strong light and improves the screen brightness to protect eyes.

Remark:

1. This AR glass is to meet customer need under wavelengths of visible light.

2. Light transmittance under different wavelength can be adjusted to meet diversitied need.

anti reflective glass cut to size

non reflective picture glass

Flat Shaped Non Reflective Glass 2mm 3mm Thickness For Electronic Display Images